Accessories

Various accessories that make brewing easier.

Accessories

Sifon clip Mini & Standard

5755720
€4.84
Siphon clip for securing a compatible siphon up to 3/8 inch to a fermenter or bucket.
€13.49
Mr.Malt mini automatic siphon with 34.5 cm body, sediment filter, clip, 1.5 m tube and bottling stick for transferring beer.
€14.49
Mr.Malt maxi automatic siphon with 63.5 cm body, sediment filter, clip, 1.5 m tube and bottling stick for transferring beer.
HopTube
Last items in stock
Accessories

Hop Tube

6135520
€23.79
Hop Tube in 304 stainless steel for dry hopping with cones or pellets, or adding spices and wood chips. Diameter 66 mm, height 297 mm.
Accessories

Dryhop bags (2 pieces)

6135375
€2.40
Pack of two bags for holding hops during dry hopping. Helps keep loose hop material together for easier removal.
Erlenmeyer flask - 2000ml
Ni na zalogi
equipment

Erlenmeyer flask - 1000ml

5394899
€16.62
Erlenmeyer flask 1000 ml for brewing preparations such as yeast starters. Height 223 mm and top opening diameter 49 mm.
Erlenmeyer flask - 2000ml
Last items in stock
equipment

Erlenmeyer flask - 2000ml

5394898
€25.05
Erlenmeyer flask 2000 ml for brewing preparations such as yeast starters. Height 287 mm and top opening diameter 52 mm.
Accessories

Magnetic stir bar

5395015
€3.70
Plastic-coated magnetic stir bar, 2.5 cm long. One piece for use with a compatible magnetic stir plate.
Accessories

Iodine tincture

5394910
€8.00
Iodine tincture for checking starch conversion during mashing. A dark colour change indicates residual starch in the sample.
Air filter 0,2 micron
Ni na zalogi
equipment

Air filter 0,2 micron

6135300
€3.34
0.2 micron sterile air filter for wort aeration. Install in the air line of a compatible brewing aeration setup.
equipment

Scoop 34cm

6136030
€3.42
34 cm scoop for handling brewing ingredients. A practical accessory for measuring and transferring dry ingredients.
equipment

Mpd hose 6,7mm x 9,5mm - 1m

4184305
€1.40
MPD dispensing hose: 6.7 mm inner diameter and 9.5 mm outer diameter. Length 1 m, for compatible John Guest fittings.
Bottle brush
Ni na zalogi
equipment

Brush

5775185
€3.13
Brush for cleaning pipettes, connectors, small tubes and hard-to-reach openings in brewing equipment.
Vrelna veha
Ni na zalogi
equipment

Blow off

6135305
€2.82
Fermentation airlock that allows carbon dioxide to escape while limiting contact between the beer and outside air. Fill to the marked level.
equipment

Blow off

0130197
€4.78
Fermentation airlock that allows carbon dioxide to escape while limiting contact between the beer and outside air. Fill to the marked level.
equipment

Airlock seal

6135330
€1.76
Replacement seal for fitting an airlock to a compatible fermenter lid. Helps seal the opening so fermentation gas exits through the airlock.
equipment

Tap for plastic fermentor

5755135
€3.99
Complete replacement tap with seal for a compatible plastic fermenter. Check the opening and thread before fitting.
Accessories and spares

Tap seal

5755140
€0.49
Replacement tap seal for compatible 16, 28 and 32 litre plastic fermentors. Check the tap and seal dimensions before fitting.
equipment

Silicone Grease - Sanitary

6117920
€9.56
Haynes silicone grease for lubricating compatible O-rings, valves and moving parts in brewing equipment.
equipment

Tube 8 Mm EVABarrier

503058
€2.73
Double-wall EVABarrier tubing with 8 mm outer diameter and an inner polymer barrier. Unit length: 1 m.
equipment

Float Dip Tube Filter

504023
€3.99
Filter for a floating dip tube to help keep hops out of the intake. HDPE and 304 stainless steel; 40.5 × 27 mm with 7.2 mm barb.
equipment

Doutight Inline Regulator

0504046
€20.15
Adjustable inline regulator with 0–4 bar / 0–60 PSI range and Duotight fittings for 8 mm tubing. For compatible air, CO₂ or nitrogen lines.
€20.15
Adjustable BlowTie spunding valve with built-in gauge, 0–1 bar / 0–15 PSI range and Duotight connections for 8 mm tubing.
€5.25
Set of three calibration powders for pH 4.00, 6.86 and 9.18. For calibrating a compatible pH meter, including the Beverage Doctor.
€7.50
25 ml storage solution for a compatible pH electrode. Helps keep the electrode ready for measurements between uses.
Tube Brush
Ni na zalogi
equipment

Tube Brush

505916
€6.54
Tube cleaning brush with 8 mm diameter and 80 cm length for compatible brewing tubing.
Cornelius Refurbishment Kit
Ni na zalogi
equipment

Cornelius Refurbishment Kit

530230
€8.85
Replacement O-rings and gaskets for refurbishing a compatible Cornelius keg. Check the seal sizes against your keg.
equipment

multitool

531050
€6.40
7-in-1 wrench tool for working on compatible taps, regulators and brewing fittings.
equipment

Tap Brush

531027
€6.55
Brush for cleaning accessible internal parts of a compatible beer tap and removing accumulated deposits.
equipment

Temperature Probe

504165
€9.85
Temperature probe with a 2 m cable and 50 mm waterproof stainless steel sensing tip. For a compatible controller.
Product added to wishlist
Product added to compare.

Stran uporablja piškotke. Preberi več